{"id":8527,"date":"2025-01-30T16:19:17","date_gmt":"2025-01-30T15:19:17","guid":{"rendered":"https:\/\/rcs.now-gmbh.de\/metrology\/"},"modified":"2025-08-06T14:13:04","modified_gmt":"2025-08-06T12:13:04","slug":"metrology","status":"publish","type":"page","link":"https:\/\/rcs.now-gmbh.de\/en\/metrology\/","title":{"rendered":"Metrology"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Metrology<\/h1>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Metrology is the science of measurement. In the context of hydrogen infrastructure, it covers aspects such as hydrogen quality, calibration, quantity measurement, certification and taxation. It ensures compliance with quality standards across Europe and enables the entire infrastructure network to be interoperable. This includes the entire usage chain, from producers and refuelling stations to vehicles and applications. The legal basis for calibration and quantity measurement is the German Measurement and Calibration Act (MessEG) and the European Measuring Instruments Directive (MID).<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tLearn more<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Quality<\/u><\/a><\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Calibration<\/u><\/a><\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

GHG Reduction Quota<\/u><\/a><\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

GHG Certification<\/u><\/a><\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

AFIR Hydrogen quality and purification<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Meaning of calibration, calibration standards and calibration bodies<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

GHG quota, GHG quota trading, quota price and fulfilment options<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Meaning of certification, hydrogen colours and certification bodies<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Quality<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Hydrogen (H\u2082) quality and purity are especially critical in the field of fuel cell technology, as contaminants such as sulfur can cause irreversible damage to the fuel cell. The Alternative Fuels Infrastructure Regulation (AFIR) requires that public hydrogen refueling stations provide hydrogen that meets the quality standard set by EN 17124 (Grade D of ISO 14687: 99.97% H\u2082 purity, sulfur-free). This quality level is also anchored in the 10th Federal Immission Control Ordinance (10. BImSchV).<\/p>

ISO 19880-8 defines a protocol for achieving and monitoring hydrogen quality targets at refueling stations.<\/p>

Thermal applications, such as the use of hydrogen in combustion engines, have significantly lower requirements regarding gas purity and can operate with lower quality grades such as Grade F of ISO 14687. The classification into standardized quality grades for different applications thus reduces costs, simplifies handling, and lowers the risk of damage to components for all producers and users.<\/p>

Regular monitoring of hydrogen quality ensures its safe use in the intended application. This monitoring is conducted by independent approved inspection bodies (Z\u00dcS). Information about approved inspection bodies is available from the Federal Institute for Occupational Safety and Health: BAuA<\/a><\/p>

Sampling of hydrogen from the refueling station must follow the procedure described in ISO 19880-9, while measurement and verification of hydrogen quality must comply with ISO 21087 in accordance with the 10th BImSchV.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
Purification<\/h6>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The most widely used method for hydrogen purification is Pressure Swing Adsorption (PSA). The safety of PSA systems is governed by ISO 19883.<\/p>\n

Purification should take place at critical injection and withdrawal points, for example, when hydrogen is dispensed from a pipeline to a fuel cell vehicle via a refueling station.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Calibration<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

In order to ensure that customers and operators can rely on an accurate delivery quantity at the hydrogen refueling station (HRS), calibration of hydrogen dispensing is essential. Accordingly, HRS dispensers must be regularly tested for accuracy and correctness according to the German Measurement and Calibration Act (MessEG), typically every two years, using accuracy class 2.<\/p>\n

The measurement must be carried out in accordance with OIML R 139 to ensure proper execution. The Organization of Legal Metrology (OIML) recommends applying error class 2 for hydrogen refueling stations, which allows a Mean Percentage Error (MPE) of 2% during calibration and 3% during operation. This means the actual amount of hydrogen may deviate from the indicated amount by a maximum average of 2% during calibration and 3% during regular operation.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
OIML R 139<\/h6>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The International Organization of Legal Metrology (OIML) issues recommendations on various metrology-related topics, which are intended to be implemented into the national legislation of its member states. Accordingly, OIML R 139 \u201cCompressed gaseous fuel measuring systems for vehicles\u201d is a key standard in the field of calibration for hydrogen refueling stations (HRS).
\nOIML R 139-1 defines the metrological and technical requirements, while OIML R 139-2 outlines the metrological controls and performance tests.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
Calibration Standards and Calibration Bodies<\/h6>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

To perform a calibration, a calibration standard (i.e. a reference device) is used. According to \u00a7 45 ff of the German Measurement and Calibration Act (MessEG), the Committee for Rule Determination of the “Physikalisch-Technische Bundesanstalt” (PTB) is responsible for the development and validation of new calibration standards. The PTB has therefore developed a calibration standard using a Coriolis mass flow meter, which is intended to measure the amount of hydrogen during the calibration process. In addition, gravimetric measuring systems from Air Liquide and Linde are available, which can also be used as calibration standards.
\nHowever, gravimetric methods reach practical limits when calibrating heavy-duty refueling stations with up to 200 kg of hydrogen per refueling process.<\/p>\n

The regular calibration of refueling stations is then carried out by the state calibration authorities, based on the PTB’s calibration standard, in accordance with \u00a7 40 MessEG. Additionally, other testing centers may be authorized by the competent state authorities to calibrate gas measurement devices. According to the German Measurement and Calibration Ordinance (MessEV), calibration must be performed every two years.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
Coriolis Process<\/h6>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The Coriolis mass flow meter measures the mass flow of a gas or liquid using the Coriolis principle. In simple terms, the Coriolis mass flow meter consists of two metallic tubes that are set into vibration by actuators. Depending on the amount of mass flowing through the tubes, they oscillate differently, allowing the dispensed quantity to be determined based on the mass flow.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

GHG Reduction Quota<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Under the greenhouse gas (GHG) reduction quota (THG-Quote), companies that place diesel or gasoline fuels on the market are required to reduce their GHG emissions by an annually increasing percentage. This quota is defined in the Renewable Energy Directive (RED) and implemented nationally in Section 37 of the Federal Immission Control Act (BImSchG). The reduction is based on a reference value, which is calculated by multiplying a fossil-based comparison value by the energy content of all fuels and compliance options used by the respective company.<\/p>

The calculation method for GHG quotas is defined in the BImSchG. Compliance options include, for example, electricity-based fuels or electricity used in the field of electromobility.<\/p>

As an additional compliance option, companies may participate in the quota trading system. Both obligated and non-obligated parties can take part in quota trading. In practical terms, this means that companies unable to meet their greenhouse gas (GHG) reduction obligations under the quota system can fulfill them by purchasing quotas from other companies\u2014at a market-based price.<\/p>

The 37th Federal Immission Control Ordinance (BImSchV) allows GHG quota trading for hydrogen refueling station (HRS) operators, while the 38th BImSchV enables trading for battery-electric vehicles. Owners of hydrogen-powered vehicles cannot participate in the quota trading system, as they do not place the fuel on the market themselves. The GHG quota trading system is intended as an instrument to promote alternative drive systems and the corresponding infrastructure, financed by companies with GHG obligations. The quota requirement increases annually and is expected to reach 25% by 2030. Trading of GHG quotas takes place via certificates on trading platforms. In the case of large-scale beneficiaries, transactions may be executed through direct contracts, which are supervised by the German Environment Agency (UBA).<\/p>

GHG quota trading is a market-based tool designed to promote renewable energy sources in a cost-efficient manner. It also supports the development of a hydrogen-based economy by helping to reduce hydrogen prices at refueling stations. At the same time, the rising cost of fossil fuels makes hydrogen more competitive.<\/p>

However, GHG quota prices have dropped significantly in recent years due to market dynamics and falsely declared certificates, which has, in part, limited the intended effectiveness of the quota trading system.<\/p>

Further information on GHG quotas:<\/p>

GHG Quota Trading \u2013 Participation Options for Climate-Friendly Commercial Vehicles<\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

GHG Certification <\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

For the international trade of hydrogen (H2<\/sub>), its origin, production method, associated CO2<\/sub> emissions, and quality must be certified in a tamper-proof manner. Initial standards for the certification of hydrogen are currently under development (ISO 19870-1 to 19870-4). These standards are primarily intended to serve the determination and calculation of the values required for certification.<\/p>\n

At the regulatory level the certification of renewable hydrogen (RFNBO \u2013 Renewable Fuels of Non-Biological Origin) is possible in Europe due to the the Renewable Energy Directive (RED). The issued certificates are intended to reliably and securely document the amount of CO2<\/sub> emissions. For this purpose, a dedicated calculation method has been developed by the EU. In the future, this method may conflict with the ISO calculation approach or other national methodologies, which could complicate the reliable certification of hydrogen on an international scale.<\/p>\n

A unified extension of the certification process on both normative and regulatory levels would simplify the global distribution and sale of renewable hydrogen on the world market. Moreover, it could accelerate the development of hydrogen technologies in countries with high potential for renewable energy.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
Digital Product Pass<\/h6>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The Digital product pass is intended to digitize and globally standardize the certification of storage containers and their contained gases and liquids in the future. These passports will include information such as composition\/purity, country of origin, production method, and CO2<\/sub> footprint. Particular emphasis will be placed on data security, transparency, and easy access. Corresponding systems are currently under development at the German Institute for Standardization (DIN).<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
Hydrogen Colours<\/h6>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The production method is a decisive factor in the certification process of hydrogen, as it significantly influences the CO2<\/sub> footprint. Different methods release varying amounts of greenhouse gases.
\nHydrogen is often categorized by different colors. However, this is misleading, as the definitions are imprecise and not standardized globally. Many experts consider it more effective to indicate the greenhouse gas intensity of hydrogen instead of using color codes.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
Certification Bodies<\/h6>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Independent certification bodies currently exist that certify hydrogen using their own testing procedures. Examples of such certification bodies include CertifHy and T\u00dcV.
\nTo issue certificates in accordance with the requirements of the Renewable Energy Directive (RED), the certification systems of these bodies must be approved by the European Commission.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

Metrology Metrology is the science of measurement. In the context of hydrogen infrastructure, it covers aspects such as hydrogen quality, calibration, quantity measurement, certification and taxation. It ensures compliance with quality standards across Europe and enables the entire infrastructure network to be interoperable. This includes the entire usage chain, from producers and refuelling stations to […]<\/p>\n","protected":false},"author":411,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"inline_featured_image":false,"footnotes":""},"class_list":["post-8527","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/rcs.now-gmbh.de\/en\/wp-json\/wp\/v2\/pages\/8527","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/rcs.now-gmbh.de\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/rcs.now-gmbh.de\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/rcs.now-gmbh.de\/en\/wp-json\/wp\/v2\/users\/411"}],"replies":[{"embeddable":true,"href":"https:\/\/rcs.now-gmbh.de\/en\/wp-json\/wp\/v2\/comments?post=8527"}],"version-history":[{"count":6,"href":"https:\/\/rcs.now-gmbh.de\/en\/wp-json\/wp\/v2\/pages\/8527\/revisions"}],"predecessor-version":[{"id":8665,"href":"https:\/\/rcs.now-gmbh.de\/en\/wp-json\/wp\/v2\/pages\/8527\/revisions\/8665"}],"wp:attachment":[{"href":"https:\/\/rcs.now-gmbh.de\/en\/wp-json\/wp\/v2\/media?parent=8527"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}